CNC operator jobs in Hosur & Bengaluru
Precision machining shifts on CNC lathes, VMCs, grinders and wire-cut machines. SuperGig Partner puts the CNC shifts that plants post in Hosur and the Bengaluru industrial hubs on a map, with the pay on every pin, so you know what a shift pays before you book it.
WhatsApp us on the same number
- Pay shown before you book
- No fees, no deposits, no agents
- KYC verified by SuperGig
Updated
Skills this shift needsSuperGig Partner - #1103 CNC Turning Operator L2
- #1311 Blueprint & Measurement Reading L2
Needs L2 in every listed skill
- 10CNC & Machining skills in the Partner app
- L1–L5five levels for every skill
- 14industrial hubs on the Hosur–Bengaluru corridor
- 5languages in the Partner app
What a CNC operator does on a shift
A CNC operator runs computer-controlled machines that cut metal to tight sizes: CNC lathes and turning centres, vertical machining centres (VMCs), grinders and EDM machines. A shift starts at the machine with the setter or the operator before you: which program is loaded, which offsets changed and how the last parts measured. Then you load raw parts or castings into the fixture, run the cycle and check the first part against the drawing before the batch goes on.
The skill is in the details. You listen for chatter, watch tool wear and coolant flow, measure parts with a vernier, micrometer or bore gauge at the interval on the inspection sheet, and change worn inserts when the setter says so. When a size starts to drift, a good operator stops the machine and calls the setter instead of sending bad parts down the line.
Programming, setting and tool-room work are separate skills in the app: #1102 CNC Programmer (VMC/HMC), #1109 Tool & Die Maker and #1110 CAD / CAM Draughtsman. A shift lists the skills it needs, so you can see whether a plant wants an operator or a programmer before you book.
Safety and PPE
Every plant sets its own safety rules. A shift can list what to bring or wear, like safety shoes or PPE, and the hard parts, like heavy lifting or night work, so read it before you book.
- Eye protection Chips and coolant spray fly: keep safety glasses on and the door shut while the machine cuts.
- Care with gloves Gloves can catch on a turning chuck or spindle; follow the plant’s rule on when to wear them.
- Safety shoes Castings, fixtures and chucks are heavy; closed safety shoes protect your feet.
- Nothing loose Roll up sleeves and tie back hair before you work near a chuck or spindle.
10 CNC & Machining skills you can add
Plants book by skill number and level. Add the numbered skills you can do; each one climbs from L1 to L5 as plants approve your shifts in it.
- #1101 CNC Operator
- #1102 CNC Programmer (VMC/HMC)
- #1103 CNC Turning Operator
- #1104 CNC Milling / VMC Operator
- #1105 Grinding Machine Operator
- #1106 EDM / Wire-Cut Operator
- #1107 Drilling / Tapping / SPM Operator
- #1108 Honing / Lapping / Broaching Operator
- #1109 Tool & Die Maker
- #1110 CAD / CAM Draughtsman
How a skill levels up
- L1Starter
- L2Skilled
- L3Proficient
- L4Expert
- L5Master
Every skill starts at L1 when you add it. Only SuperGig sets a level, from your record. Three things move a skill up:
- Approved shifts in the skillShifts a plant approved that listed this skill when it was posted.
- Arriving on timeAn arrival SuperGig verified, such as the WorkPass check at the gate.
- How plants rate your workIt counts once a plant has rated you. Before that it never holds you back.
The app shows what each skill’s next level needs.
The skill check
A shift can list skills and one minimum level for all of them. You need every listed skill at that level, and SuperGig checks yours before the booking is accepted. A shift with no skills listed has no skill check: any KYC-verified Partner can book it.
Licences, Certifications & Compliance
Skills from this category of the app that go with the work.
- #2011 5S
- #2013 TPM (Total Productive Maintenance)
- #2014 ISO 9001 / IATF 16949
5S, TPM (Total Productive Maintenance) and ISO 9001 / IATF 16949 are practices, not personal certificates: you add them like any other skill.
Where a standard fits, the app maps each skill to NCO-2015, NSQF, ISCO-08 and ESCO. #1101 CNC Operator, for example, maps to NCO-2015 7223.5002, “CNC Operator - Machining Technician”.
CNC operator shifts across the corridor
SuperGig works in 14 industrial hubs on the Hosur–Bengaluru corridor: 3 in Hosur and 11 in and around Bengaluru (Bangalore). When plants there post CNC operator shifts, you see them on the map in SuperGig Partner, within 25 km of you or up to 100 km if you widen it.
Hosur
- SIPCOT Phase 1
- SIPCOT Phase 2
- Hosur Town
Bengaluru
- Electronic City
- Bommasandra
- Jigani
- Attibele
- Hoskote
- Whitefield
- Peenya
- Nelamangala
- Dabaspet
- Doddaballapura
- Bidadi
Shifts that fit your week
Set your days, time-of-day slots and how far you will travel in My Availability. Shifts come in four shapes:
- One day
- Repeats weekly
- Hourly slots, 1–8 h
- Runs of 1–31 days
Get set up for CNC operator shifts
The SuperGig Partner app is a free Android app, and we set every Partner up directly. Our corridor team will reach you for further onboarding.
- 1 Join as a PartnerTap Join as a Partner, call us or WhatsApp us with your name, your area and the work you do.
- 2 Do KYC onceUpload your Aadhaar and PAN, reviewed by SuperGig’s verification team. You need a verified Aadhaar to book.
- 3 Add your skillsPick the CNC & Machining skills you can do. Each starts at L1.
- 4 Set your availabilityChoose your days, your time-of-day slots and how far you will travel.
- 5 Book and show your WorkPassEvery shift shows its pay before you book. At the gate, show your WorkPass code or its QR.
You never pay to work here. Ever. No fees, no deposits, no agents.
The promise inside SuperGig Partner
Questions about CNC operator shifts
Ask us in English, Tamil, Hindi, Telugu or Kannada.
Hiring for a plant?Pre-book SuperGig Plant